{
  "apiVersion": 1,
  "kind": "work-order",
  "purpose": "Taking the firearm apart for a job such as refinishing, and putting it back together to specification.",
  "firearm": {
    "slug": "henry-h001",
    "name": "Henry Classic Lever Action .22",
    "manufacturer": {
      "id": "henry",
      "name": "Henry Repeating Arms"
    },
    "category": "rimfire-rifle",
    "action": "lever-action",
    "calibers": [
      ".22 Long Rifle",
      ".22 Short",
      ".22 Long"
    ],
    "alsoKnownAs": [
      "Henry H001",
      "Henry Lever .22"
    ],
    "coversAlso": [],
    "page": "firearms/henry-h001.html",
    "bundle": "api/v1/firearms/henry-h001.json",
    "lastUpdated": "2026-10-29"
  },
  "notices": [
    "Henry Repeating Arms limits owner disassembly: Buttstock off (receiver cover tang screw) and receiver cover off (four screws) to expose the internal parts; inner mechanisms stay assembled.",
    "No torque values are recorded for this firearm. Get them from the manufacturer or a gunsmith; do not estimate."
  ],
  "disclaimer": {
    "headline": "Read this before you use anything here.",
    "points": [
      "This is a guide, not an authority. Entries are compiled from manufacturer manuals, technical manuals, published references, and community knowledge. Some of it comes from sources that are not authoritative, and some of it may simply be wrong.",
      "Always consult the manufacturer's manual for your specific firearm and serial-number range. Manufacturers change designs mid-production without renaming the model. The manual that shipped with your firearm outranks anything on this site.",
      "Consult a licensed gunsmith for anything beyond routine field stripping and cleaning, for any firearm you are unsure about, and for any procedure marked as gunsmith-recommended here.",
      "Treat every firearm as loaded. Verify it is unloaded, with the magazine removed and the chamber physically and visually checked, before any procedure in this database. Point it in a safe direction the entire time.",
      "Disassembly can damage a firearm or injure you. Springs are under tension, parts can launch, and reassembling a firearm incorrectly can make it unsafe to fire in a way that is not obvious from the outside. If a reassembled firearm does not pass a function check, stop and see a gunsmith.",
      "Torque values are shown in two groups. Values from the manufacturer or the issuing military are shown as such, with the document they came from. Values reported by anyone else — parts makers, gunsmithing publishers, articles, forums — are shown separately with who said them, how reliable that source is, and their exact words. Those are not specifications. Confirm any torque value with the manufacturer or a licensed gunsmith before relying on it.",
      "Nothing here is legal advice. Firearms law varies by country, state, and city, and some modifications or configurations are regulated or prohibited. You are responsible for knowing and following the law where you are.",
      "No warranty of any kind. Contributors and maintainers accept no liability for damage, injury, or loss arising from use of this material."
    ],
    "page": "disclaimer.html",
    "legal": {
      "summary": "Legal notice: this material is third-party information compiled from sources of varying reliability and is provided for general informational and educational purposes only. It is not gunsmithing, technical, safety or legal advice, it is not verified or endorsed by any manufacturer, and it must not be taken as fact. Any work on a firearm beyond the routine field stripping described in its own owner's manual should be performed only by a licensed and insured gunsmith. You use this material entirely at your own risk. Fundamental Build LLC and the project's contributors make no warranty of any kind and accept no liability for death, injury, damage or loss arising from its use. Full terms: LEGAL.md.",
      "page": "legal.html",
      "notice": "https://github.com/Fundamental-build-LLC/Pew-Takedown/blob/main/LEGAL.md"
    }
  },
  "sourcing": {
    "confidence": "high",
    "verification": "manufacturer-manual-verified"
  },
  "manufacturerDisassembly": {
    "status": "limited",
    "limit": "Buttstock off (receiver cover tang screw) and receiver cover off (four screws) to expose the internal parts; inner mechanisms stay assembled.",
    "statement": "Henry says not to take the rifle apart beyond the manual (buttstock and receiver cover off) and to take it to a qualified gunsmith if further disassembly is needed.",
    "source": {
      "title": "Henry H001 Series Lever Action Rifle User Manual",
      "publisher": "Henry Repeating Arms",
      "reliability": "primary",
      "url": "https://www.henryusa.com/wp-content/uploads/2021/04/Henry-H001-Series-User-Manual.pdf",
      "page": "11",
      "pdfPage": 11,
      "pageUrl": "https://www.henryusa.com/wp-content/uploads/2021/04/Henry-H001-Series-User-Manual.pdf#page=11",
      "quote": "NOTICE! DO NOT ATTEMPT TO TAKE YOUR FIREARM APART FURTHER THAN EXPLAINED IN THIS MANUAL. Your firearm is a specialized, finely fitted mechanism. You may permanently damage it by attempting to disassemble the inner mechanisms. If further disassembly for service or cleaning is required, take your firearm to a qualified gunsmith."
    }
  },
  "recalls": [],
  "shopTier": {
    "tier": 2,
    "group": "rimfire-rifle",
    "rating": "Pew-Takedown editorial rating (1 easy – 3 hardest), not the manufacturer's",
    "reason": "About 47 listed parts; a full strip goes past Henry's sanctioned limit into the side-plate action: lever and locking bar on springs, carrier feed lever, hammer and hammer spring. Several small springs to control and a side cover that must be wiggled on, but no carrier timing is reported for the .22 Henry.",
    "confidence": "medium",
    "partCount": {
      "value": 47,
      "kind": "line-items",
      "covers": "H001 series list (all H001 models), single list",
      "basis": "manufacturer-parts-list",
      "source": {
        "title": "Henry H001 Series Lever Action Rifle User Manual",
        "publisher": "Henry Repeating Arms",
        "reliability": "primary",
        "url": "https://www.henryusa.com/wp-content/uploads/2021/04/Henry-H001-Series-User-Manual.pdf",
        "page": "15",
        "pdfPage": 15,
        "pageUrl": "https://www.henryusa.com/wp-content/uploads/2021/04/Henry-H001-Series-User-Manual.pdf#page=15",
        "quote": "54 Trigger Pin"
      }
    },
    "painPoints": [
      {
        "issue": "Henry says not to take the rifle apart past the manual; the inner mechanism is finely fitted and can be permanently damaged.",
        "during": "both",
        "source": {
          "title": "Henry H001 Series Lever Action Rifle User Manual",
          "publisher": "Henry Repeating Arms",
          "reliability": "primary",
          "url": "https://www.henryusa.com/wp-content/uploads/2021/04/Henry-H001-Series-User-Manual.pdf",
          "page": null,
          "pdfPage": null,
          "pageUrl": null,
          "quote": "DO NOT ATTEMPT TO TAKE YOUR FIREARM APART FURTHER THAN EXPLAINED IN THIS MANUAL."
        }
      },
      {
        "issue": "Refitting the lever means re-seating the locking bar on its spring (a second nested spring on .22 WMR/.17 HMR) with the tapered end rearward and tapping its pin home; the writer found it the trickiest part and it took several tries.",
        "during": "reassembly",
        "source": {
          "title": "Installing the Large Loop Lever for Henry Lever Action Rifles",
          "publisher": "Industry Outsider",
          "reliability": "secondary",
          "url": "https://industryoutsider.com/installing-the-large-loop-lever-for-henry-lever-action-rifles",
          "page": null,
          "pdfPage": null,
          "pageUrl": null,
          "quote": "From here, the locking bar needs to be reinstalled. For me, this was the trickiest part. Carefully seat the spring first."
        }
      },
      {
        "issue": "With the side cover off, cocking and dropping the hammer lets the hammer spring fly out; the side cover then has to be wiggled back on over the pins.",
        "during": "both",
        "source": {
          "title": "Installing the Large Loop Lever for Henry Lever Action Rifles",
          "publisher": "Industry Outsider",
          "reliability": "secondary",
          "url": "https://industryoutsider.com/installing-the-large-loop-lever-for-henry-lever-action-rifles",
          "page": null,
          "pdfPage": null,
          "pageUrl": null,
          "quote": "If you cock the hammer while it’s apart, and then pull the trigger, the hammer spring may take flight."
        }
      },
      {
        "issue": "With the lever out, the carrier feed lever has to be held in place with a dummy round on magnum models.",
        "during": "both",
        "source": {
          "title": "Installing the Large Loop Lever for Henry Lever Action Rifles",
          "publisher": "Industry Outsider",
          "reliability": "secondary",
          "url": "https://industryoutsider.com/installing-the-large-loop-lever-for-henry-lever-action-rifles",
          "page": null,
          "pdfPage": null,
          "pageUrl": null,
          "quote": "If you have either of these models, you’ll need a dummy cartridge or empty shell at this point. This is required to hold the carrier feed lever in place."
        }
      }
    ],
    "minutes": {
      "strip": 45,
      "rebuild": 70,
      "basis": "estimated",
      "note": "Strip of magazine tube, stock, receiver side covers, lever and locking bar, carrier feed lever, bolt, hammer and trigger, sights and barrel band; rebuild longer for the locking-bar spring and side-cover fit.",
      "source": null
    },
    "stripScope": [
      {
        "assembly": "Magazine / stock",
        "removes": [
          "inner magazine tube",
          "buttstock bolt and stock",
          "barrel band / fore-end screws"
        ]
      },
      {
        "assembly": "Receiver",
        "removes": [
          "side cover screws and side cover(s)",
          "locking bar pin, locking bar and spring(s)",
          "lever pin and lever",
          "carrier / carrier feed lever and plunger",
          "bolt and firing pin",
          "hammer, hammer spring and strut",
          "trigger, sear and pins"
        ]
      },
      {
        "assembly": "Sights",
        "removes": [
          "rear sight (dovetail) and elevator",
          "front sight"
        ],
        "tools": [
          "sight pusher"
        ]
      }
    ],
    "hardware": {
      "pins": 10,
      "springs": 7,
      "detents": 0,
      "basis": "counted from the manufacturer's parts list (one per key number unless a quantity is given)"
    },
    "specialTools": [
      {
        "tool": "Bent wire hook",
        "usedFor": "Guiding the locking-bar spring into place"
      },
      {
        "tool": "Dummy round (.22 WMR/.17 HMR)",
        "usedFor": "Holding the carrier feed lever"
      },
      {
        "tool": "Sight pusher or brass drift",
        "usedFor": "Dovetail rear sight"
      }
    ],
    "fitOnRebuild": [
      {
        "check": "Hammer drop and lever function test",
        "why": "Henry/Industry Outsider: work the lever and drop the hammer under control before live fire.",
        "source": {
          "title": "Installing the Large Loop Lever for Henry Lever Action Rifles",
          "publisher": "Industry Outsider",
          "reliability": "secondary",
          "url": "https://industryoutsider.com/installing-the-large-loop-lever-for-henry-lever-action-rifles",
          "page": null,
          "pdfPage": null,
          "pageUrl": null,
          "quote": "As usual, a function test should be performed after any disassembly or replacement of parts."
        }
      },
      {
        "check": "Sight re-zero",
        "why": "Sights removed for coating.",
        "source": null
      }
    ],
    "assessed": "2026-10-29"
  },
  "videos": [
    {
      "title": "Henry Lever Action .22 Loading",
      "url": "https://www.henryusa.com/own-a-henry/instructional-videos/firearm-guides/lever-action-model-h001-22lr/",
      "platform": "vimeo",
      "embedUrl": "https://player.vimeo.com/video/52944542",
      "shows": [
        "clear-and-make-safe",
        "operation"
      ],
      "appliesTo": "Henry H001 Classic Lever Action .22",
      "published": "2012-11-06",
      "note": null,
      "channel": {
        "id": "vimeo:henryrepeating",
        "name": "Henry Repeating Arms",
        "url": "https://vimeo.com/henryrepeating",
        "owner": "Henry Repeating Arms"
      },
      "accessed": "2026-10-15"
    },
    {
      "title": "Henry Lever Action .22 Disassembly",
      "url": "https://www.henryusa.com/own-a-henry/instructional-videos/firearm-guides/lever-action-model-h001-22lr/",
      "platform": "vimeo",
      "embedUrl": "https://player.vimeo.com/video/52943527",
      "shows": [
        "field-strip",
        "detail-strip"
      ],
      "appliesTo": "Henry H001 Classic Lever Action .22",
      "published": "2012-11-06",
      "note": null,
      "channel": {
        "id": "vimeo:henryrepeating",
        "name": "Henry Repeating Arms",
        "url": "https://vimeo.com/henryrepeating",
        "owner": "Henry Repeating Arms"
      },
      "accessed": "2026-10-15"
    },
    {
      "title": "Henry Lever Action .22 Reassembly",
      "url": "https://www.henryusa.com/own-a-henry/instructional-videos/firearm-guides/lever-action-model-h001-22lr/",
      "platform": "vimeo",
      "embedUrl": "https://player.vimeo.com/video/52944540",
      "shows": [
        "reassembly"
      ],
      "appliesTo": "Henry H001 Classic Lever Action .22",
      "published": "2012-11-06",
      "note": null,
      "channel": {
        "id": "vimeo:henryrepeating",
        "name": "Henry Repeating Arms",
        "url": "https://vimeo.com/henryrepeating",
        "owner": "Henry Repeating Arms"
      },
      "accessed": "2026-10-15"
    },
    {
      "title": "Henry Lever Action .22 Clean and Lube",
      "url": "https://www.henryusa.com/own-a-henry/instructional-videos/firearm-guides/lever-action-model-h001-22lr/",
      "platform": "vimeo",
      "embedUrl": "https://player.vimeo.com/video/52944538",
      "shows": [
        "cleaning",
        "maintenance"
      ],
      "appliesTo": "Henry H001 Classic Lever Action .22",
      "published": "2012-11-06",
      "note": null,
      "channel": {
        "id": "vimeo:henryrepeating",
        "name": "Henry Repeating Arms",
        "url": "https://vimeo.com/henryrepeating",
        "owner": "Henry Repeating Arms"
      },
      "accessed": "2026-10-15"
    },
    {
      "title": "Henry Lever Action .22 Hammer Safety",
      "url": "https://www.henryusa.com/own-a-henry/instructional-videos/firearm-guides/lever-action-model-h001-22lr/",
      "platform": "vimeo",
      "embedUrl": "https://player.vimeo.com/video/52944544",
      "shows": [
        "operation"
      ],
      "appliesTo": "Henry H001 Classic Lever Action .22",
      "published": "2012-11-06",
      "note": null,
      "channel": {
        "id": "vimeo:henryrepeating",
        "name": "Henry Repeating Arms",
        "url": "https://vimeo.com/henryrepeating",
        "owner": "Henry Repeating Arms"
      },
      "accessed": "2026-10-15"
    },
    {
      "title": "How to Adjust Semi-Buckhorn Sights",
      "url": "https://www.youtube.com/watch?v=J6kY_nG3jLw",
      "platform": "youtube",
      "embedUrl": null,
      "shows": [
        "adjustment"
      ],
      "appliesTo": "Henry rifles with semi-buckhorn rear sights (\"found on the vast majority of our rifles\" per the description)",
      "published": "2016-07-19",
      "note": null,
      "channel": {
        "id": "UC8EGtlQBzjZubrqKTO2_xDA",
        "name": "Henry Repeating Arms",
        "url": "https://www.youtube.com/@HenryUSA",
        "owner": "Henry Repeating Arms (Henry RAC Holding Corp.)"
      },
      "accessed": "2026-10-15"
    }
  ],
  "configurations": [],
  "tools": [
    {
      "name": "Flat-blade screwdriver",
      "required": false,
      "usedFor": "The receiver cover tang screw and the four receiver cover screws, only if you take the receiver cover off."
    },
    {
      "name": "Pull-through bore cleaning kit",
      "required": true,
      "usedFor": "Cleaning the bore from breech to muzzle, as Henry directs."
    }
  ],
  "phases": [
    {
      "id": "clear",
      "title": "Clear and make safe",
      "steps": [
        {
          "n": 1,
          "instruction": "Point the muzzle in a safe direction and keep your finger off the trigger."
        },
        {
          "n": 2,
          "instruction": "Twist and withdraw the inner magazine tube from the front of the outer tube under the barrel.",
          "warning": "The magazine spring is compressed inside. Withdraw it under control.",
          "partsFreed": [
            "Inner magazine tube"
          ]
        },
        {
          "n": 3,
          "instruction": "Tip the rifle muzzle-down so any remaining cartridges roll out of the outer tube, and count them out.",
          "partsFreed": [
            "Cartridges from the magazine tube"
          ]
        },
        {
          "n": 4,
          "instruction": "Work the lever fully open and closed repeatedly, catching each cartridge, until nothing more feeds."
        },
        {
          "n": 5,
          "instruction": "With the lever open, inspect the chamber, the carrier, and the magazine tube with a light.",
          "warning": "Three places: chamber, carrier, and tube."
        },
        {
          "n": 6,
          "instruction": "Physically confirm the chamber is empty and remove all live ammunition from the work area."
        }
      ],
      "videos": [
        {
          "title": "Henry Lever Action .22 Loading",
          "url": "https://www.henryusa.com/own-a-henry/instructional-videos/firearm-guides/lever-action-model-h001-22lr/",
          "platform": "vimeo",
          "embedUrl": "https://player.vimeo.com/video/52944542",
          "shows": [
            "clear-and-make-safe",
            "operation"
          ],
          "appliesTo": "Henry H001 Classic Lever Action .22",
          "published": "2012-11-06",
          "note": null,
          "channel": {
            "id": "vimeo:henryrepeating",
            "name": "Henry Repeating Arms",
            "url": "https://vimeo.com/henryrepeating",
            "owner": "Henry Repeating Arms"
          },
          "accessed": "2026-10-15"
        }
      ]
    },
    {
      "id": "disassemble",
      "title": "Disassemble",
      "videos": [
        {
          "title": "Henry Lever Action .22 Disassembly",
          "url": "https://www.henryusa.com/own-a-henry/instructional-videos/firearm-guides/lever-action-model-h001-22lr/",
          "platform": "vimeo",
          "embedUrl": "https://player.vimeo.com/video/52943527",
          "shows": [
            "field-strip",
            "detail-strip"
          ],
          "appliesTo": "Henry H001 Classic Lever Action .22",
          "published": "2012-11-06",
          "note": null,
          "channel": {
            "id": "vimeo:henryrepeating",
            "name": "Henry Repeating Arms",
            "url": "https://vimeo.com/henryrepeating",
            "owner": "Henry Repeating Arms"
          },
          "accessed": "2026-10-15"
        }
      ],
      "procedures": [
        {
          "procedure": "field-strip",
          "title": "Field Strip — Lever and Bolt Removal",
          "level": "field-strip",
          "configuration": false,
          "steps": [
            {
              "n": 1,
              "instruction": "Complete the Clear and Make Safe procedure. Make sure the hammer is in the fired-down position — the safety only functions as designed with the hammer down — and keep all ammunition out of the cleaning area.",
              "warning": "The manual is explicit that the hammer must be down before cleaning. Never test the mechanical function of the rifle with live ammunition."
            },
            {
              "n": 2,
              "instruction": "Open the action by cycling the lever forward and inspect the chamber and bore for brass, copper, and powder fouling."
            },
            {
              "n": 3,
              "instruction": "Clean the bore in the direction of bullet travel — breech to muzzle — using a pull-through kit.",
              "tip": "Cleaning muzzle to breech drags powder residue out of the bore and into the chamber and action, which is how a rifle ends up needing a gunsmith to clean it properly. A rod and patches work if you are careful with the muzzle crown."
            },
            {
              "n": 4,
              "instruction": "Use a clean patch each pass. Never reverse a brush inside the barrel, and never run a brush down the barrel first.",
              "tip": "Reversing a brush bends the bristles like bending a wire until it snaps. A brush sent down first picks up dirt and moisture and deposits them in the chamber and receiver."
            },
            {
              "n": 5,
              "instruction": "Use only a few drops of solvent or oil — no more than the patch will absorb.",
              "tip": "Excess solvent drips into the trigger mechanism and makes it gummy; excess oil drains back into the stock and can rot the wood."
            },
            {
              "n": 6,
              "instruction": "Wipe the bolt clean of debris with solvent and a patch or small rag, then lightly oil it."
            },
            {
              "n": 7,
              "instruction": "Coat all exposed metal with a film of oil. Do not leave fired cases in the chamber — moisture sweats out of them and causes rust."
            }
          ]
        },
        {
          "procedure": "detail-strip",
          "title": "Receiver cover removal",
          "level": "detail-strip",
          "configuration": false,
          "steps": [
            {
              "n": 1,
              "instruction": "This is the only disassembly Henry documents, and the manual's own position is that you do not need it for cleaning. Complete the Clear and Make Safe procedure and confirm the hammer is down before you start.",
              "warning": "Everything past the receiver cover is outside what the manufacturer sanctions. Henry's instruction is to send it to a gunsmith instead."
            },
            {
              "n": 2,
              "instruction": "Unscrew the receiver cover tang screw and remove the buttstock first.",
              "tip": "The tang screw is parts #50 and #55 in the manual's parts list.",
              "partsFreed": [
                "Buttstock"
              ]
            },
            {
              "n": 3,
              "instruction": "Unscrew the four receiver cover screws.",
              "tip": "Part #42 in the manual's parts list."
            },
            {
              "n": 4,
              "instruction": "Lift off the receiver cover, exposing the internal parts.",
              "partsFreed": [
                "Receiver cover"
              ]
            },
            {
              "n": 5,
              "instruction": "Go no further. Reverse the order to reassemble: set the cover on, start all four screws by hand before tightening any of them, then refit the buttstock and its tang screw.",
              "tip": "Starting every screw before tightening one keeps the cover square. A cover pulled down at one corner binds the action."
            }
          ]
        }
      ]
    },
    {
      "id": "refinish",
      "title": "Refinish",
      "components": [
        {
          "name": "Buttstock",
          "procedure": "detail-strip",
          "level": "detail-strip",
          "step": 2
        },
        {
          "name": "Receiver cover",
          "procedure": "detail-strip",
          "level": "detail-strip",
          "step": 4
        }
      ],
      "manufacturerPartsList": {
        "parts": 47,
        "scope": "H001 Series lever-action .22 (all H001 models per manual cover: .22 S/L/LR, .22 Mag, .17 HMR). Single list; no variant lists in manual."
      },
      "partsDiagrams": [],
      "materials": [
        {
          "component": "Barrel",
          "material": "Steel",
          "finish": "Blued",
          "appliesTo": "H001-22 (.22 S/L/LR, 18.5in)",
          "note": null,
          "source": {
            "title": "H1 Classic Rifle & Carbine | Henry Repeating Arms — Specifications",
            "publisher": "Henry Repeating Arms",
            "reliability": "primary",
            "url": "https://www.henryusa.com/firearm/h1-classic-rifle-carbine/",
            "page": null,
            "pdfPage": null,
            "pageUrl": null,
            "quote": "Barrel Type … Round Blued Steel"
          }
        },
        {
          "component": "Receiver",
          "material": null,
          "finish": "Black",
          "appliesTo": "H001-22",
          "note": null,
          "source": {
            "title": "H1 Classic Rifle & Carbine | Henry Repeating Arms — Specifications",
            "publisher": "Henry Repeating Arms",
            "reliability": "primary",
            "url": "https://www.henryusa.com/firearm/h1-classic-rifle-carbine/",
            "page": null,
            "pdfPage": null,
            "pageUrl": null,
            "quote": "Receiver Finish … Black"
          }
        },
        {
          "component": "Stock",
          "material": "American Walnut",
          "finish": null,
          "appliesTo": "H001-22",
          "note": null,
          "source": {
            "title": "H1 Classic Rifle & Carbine | Henry Repeating Arms — Specifications",
            "publisher": "Henry Repeating Arms",
            "reliability": "primary",
            "url": "https://www.henryusa.com/firearm/h1-classic-rifle-carbine/",
            "page": null,
            "pdfPage": null,
            "pageUrl": null,
            "quote": "Stock Material … American Walnut"
          }
        }
      ],
      "note": "The components the procedures above separate. Coating, masking and cure are outside this database; follow your coating system's instructions. A part the manufacturer marks \"factory fit\" should not be swapped or reworked."
    },
    {
      "id": "reassemble",
      "title": "Reassemble",
      "videos": [
        {
          "title": "Henry Lever Action .22 Reassembly",
          "url": "https://www.henryusa.com/own-a-henry/instructional-videos/firearm-guides/lever-action-model-h001-22lr/",
          "platform": "vimeo",
          "embedUrl": "https://player.vimeo.com/video/52944540",
          "shows": [
            "reassembly"
          ],
          "appliesTo": "Henry H001 Classic Lever Action .22",
          "published": "2012-11-06",
          "note": null,
          "channel": {
            "id": "vimeo:henryrepeating",
            "name": "Henry Repeating Arms",
            "url": "https://vimeo.com/henryrepeating",
            "owner": "Henry Repeating Arms"
          },
          "accessed": "2026-10-15"
        }
      ],
      "procedures": [
        {
          "procedure": "detail-strip",
          "title": "Receiver cover removal",
          "configuration": false,
          "steps": null,
          "instruction": "Reverse the steps of \"Receiver cover removal\"."
        },
        {
          "procedure": "reassembly",
          "title": "Reassembly",
          "configuration": false,
          "steps": [
            {
              "n": 1,
              "instruction": "Confirm the bore and chamber are dry of excess solvent and that no patch or bristle is left in the action."
            },
            {
              "n": 2,
              "instruction": "If the inner magazine tube was removed for loading or cleaning, seat it fully and lock it."
            },
            {
              "n": 3,
              "instruction": "Cycle the lever through several full strokes and confirm smooth operation and full lockup."
            },
            {
              "n": 4,
              "instruction": "Confirm the hammer comes to full cock at the end of the lever stroke and that the half-cock notch holds."
            },
            {
              "n": 5,
              "instruction": "With the rifle empty, confirm the trigger does not release the hammer with the lever partly open."
            },
            {
              "n": 6,
              "instruction": "Run a dry patch through the bore before shooting."
            }
          ],
          "instruction": null
        }
      ]
    },
    {
      "id": "torque",
      "title": "Torque",
      "coverage": "none-recorded",
      "manufacturer": [],
      "reported": [],
      "notes": "The manufacturer's documents give no torque value. They say: \"Tighten the two screws when complete.\" (Henry H001 Series Lever Action Rifle User Manual, PDF p. 10)"
    },
    {
      "id": "function-check",
      "title": "Function check",
      "checks": [
        "Verify the rifle is unloaded — chamber, carrier, and magazine tube — before each step.",
        "Cycle the lever fully and confirm the bolt locks up with the lever closed.",
        "With the hammer cocked, engage the safety if fitted and press the trigger. The hammer must not fall.",
        "Disengage the safety and press the trigger. The hammer should fall.",
        "Confirm the lever safety, where fitted, prevents firing with the lever not fully closed.",
        "Load dummy rounds through the magazine tube and cycle them, confirming they feed from the carrier and eject cleanly.",
        "Confirm the inner magazine tube latches securely."
      ],
      "videos": []
    }
  ],
  "troubleshooting": [],
  "sources": [
    {
      "n": 1,
      "id": "henry-h001-manual",
      "title": "Henry H001 Series Lever Action Rifle User Manual",
      "publisher": "Henry Repeating Arms",
      "reliability": "primary",
      "url": "https://www.henryusa.com/wp-content/uploads/2021/04/Henry-H001-Series-User-Manual.pdf",
      "accessed": "2026-09-14"
    },
    {
      "n": 2,
      "id": "henryusa-specs-9da61d",
      "title": "H1 Classic Rifle & Carbine | Henry Repeating Arms — Specifications",
      "publisher": "Henry Repeating Arms",
      "reliability": "primary",
      "url": "https://www.henryusa.com/firearm/h1-classic-rifle-carbine/",
      "accessed": "2026-10-03"
    },
    {
      "n": 3,
      "id": "tier-0b3ed7d7",
      "title": "Installing the Large Loop Lever for Henry Lever Action Rifles",
      "publisher": "Industry Outsider",
      "reliability": "secondary",
      "url": "https://industryoutsider.com/installing-the-large-loop-lever-for-henry-lever-action-rifles",
      "accessed": "2026-10-29"
    }
  ]
}