{ "apiVersion": 1, "kind": "work-order", "purpose": "Taking the firearm apart for a job such as refinishing, and putting it back together to specification.", "firearm": { "slug": "iwi-tavor-x95", "name": "IWI Tavor X95", "manufacturer": { "id": "iwi", "name": "Israel Weapon Industries" }, "category": "rifle", "action": "gas-operated-long-stroke", "calibers": [ "5.56x45mm NATO", ".300 AAC Blackout", "9x19mm Parabellum" ], "alsoKnownAs": [ "X95", "Tavor SAR (predecessor)", "Micro Tavor" ], "coversAlso": [ "Tavor SAR", "X95 in 9mm conversion" ], "page": "firearms/iwi-tavor-x95.html", "bundle": "api/v1/firearms/iwi-tavor-x95.json", "lastUpdated": "2026-10-29" }, "notices": [ "This work order is written for the IWI Tavor X95. It is reported to cover Tavor SAR; X95 in 9mm conversion — if the firearm on the bench is one of those, check the torque notes: values do not always carry over.", "No torque values are recorded for this firearm. Get them from the manufacturer or a gunsmith; do not estimate." ], "disclaimer": { "headline": "Read this before you use anything here.", "points": [ "This is a guide, not an authority. Entries are compiled from manufacturer manuals, technical manuals, published references, and community knowledge. Some of it comes from sources that are not authoritative, and some of it may simply be wrong.", "Always consult the manufacturer's manual for your specific firearm and serial-number range. Manufacturers change designs mid-production without renaming the model. The manual that shipped with your firearm outranks anything on this site.", "Consult a licensed gunsmith for anything beyond routine field stripping and cleaning, for any firearm you are unsure about, and for any procedure marked as gunsmith-recommended here.", "Treat every firearm as loaded. Verify it is unloaded, with the magazine removed and the chamber physically and visually checked, before any procedure in this database. Point it in a safe direction the entire time.", "Disassembly can damage a firearm or injure you. Springs are under tension, parts can launch, and reassembling a firearm incorrectly can make it unsafe to fire in a way that is not obvious from the outside. If a reassembled firearm does not pass a function check, stop and see a gunsmith.", "Torque values are shown in two groups. Values from the manufacturer or the issuing military are shown as such, with the document they came from. Values reported by anyone else — parts makers, gunsmithing publishers, articles, forums — are shown separately with who said them, how reliable that source is, and their exact words. Those are not specifications. Confirm any torque value with the manufacturer or a licensed gunsmith before relying on it.", "Nothing here is legal advice. Firearms law varies by country, state, and city, and some modifications or configurations are regulated or prohibited. You are responsible for knowing and following the law where you are.", "No warranty of any kind. Contributors and maintainers accept no liability for damage, injury, or loss arising from use of this material." ], "page": "disclaimer.html", "legal": { "summary": "Legal notice: this material is third-party information compiled from sources of varying reliability and is provided for general informational and educational purposes only. It is not gunsmithing, technical, safety or legal advice, it is not verified or endorsed by any manufacturer, and it must not be taken as fact. Any work on a firearm beyond the routine field stripping described in its own owner's manual should be performed only by a licensed and insured gunsmith. You use this material entirely at your own risk. Fundamental Build LLC and the project's contributors make no warranty of any kind and accept no liability for death, injury, damage or loss arising from its use. Full terms: LEGAL.md.", "page": "legal.html", "notice": "https://github.com/Fundamental-build-LLC/Pew-Takedown/blob/main/LEGAL.md" } }, "sourcing": { "confidence": "high", "verification": "manufacturer-manual-verified" }, "manufacturerDisassembly": { "status": "published", "limit": null, "statement": null, "source": { "title": "IWI US Tavor X95 Operator Manual", "publisher": "IWI US, Inc.", "reliability": "primary", "url": "https://iwi.us/wp-content/uploads/2024/01/IWI-Tavor-X95-Manual.pdf", "page": "62", "pdfPage": null, "pageUrl": null, "quote": null } }, "recalls": [], "shopTier": { "tier": 2, "group": "rifle", "rating": "Pew-Takedown editorial rating (1 easy – 3 hardest), not the manufacturer's", "reason": "There are 42 line items (51 pieces), but the list keeps the sear mechanism, bolt carrier and other parts as assemblies. The traps are captive locking pins that must not come all the way out, a sear mechanism that must never have its hammer released while out of the rifle, retaining screws not to be fully removed, and a bolt carrier stop that falls out. The entry records five reassembly failures.", "confidence": "medium", "partCount": { "value": 42, "kind": "line-items", "covers": "Tavor X95 5.56 (§15.1); sear mechanism, bolt carrier and other groups as assemblies", "basis": "manufacturer-parts-list", "source": { "title": "IWI US Tavor X95 Operator Manual", "publisher": "IWI US, Inc.", "reliability": "primary", "url": "https://iwi.us/wp-content/uploads/2024/01/IWI-Tavor-X95-Manual.pdf", "page": "95", "pdfPage": null, "pageUrl": null, "quote": "42 Safety Lever" } }, "painPoints": [ { "issue": "The two locking pins are pushed through until they stop and must stay captive in the body.", "during": "both", "source": { "title": "IWI US Tavor X95 Operator Manual", "publisher": "IWI US, Inc.", "reliability": "primary", "url": "https://iwi.us/wp-content/uploads/2024/01/IWI-Tavor-X95-Manual.pdf", "page": null, "pdfPage": null, "pageUrl": null, "quote": "DO NOT PULL THE LOCKING PINS OUT COMPLETELY." } }, { "issue": "Once the sear mechanism is out, dropping its hammer damages the housing, and it must be cocked to go back in.", "during": "both", "source": { "title": "IWI US Tavor X95 Operator Manual", "publisher": "IWI US, Inc.", "reliability": "primary", "url": "https://iwi.us/wp-content/uploads/2024/01/IWI-Tavor-X95-Manual.pdf", "page": null, "pdfPage": null, "pageUrl": null, "quote": "Do not release the hammer when the sear mechanism is removed from the rifle. This will damage the housing." } }, { "issue": "Rail/adapter retaining screws are loosened but not removed.", "during": "both", "source": { "title": "IWI US Tavor X95 Operator Manual", "publisher": "IWI US, Inc.", "reliability": "primary", "url": "https://iwi.us/wp-content/uploads/2024/01/IWI-Tavor-X95-Manual.pdf", "page": null, "pdfPage": null, "pageUrl": null, "quote": "DO NOT REMOVE THE SCREWS COMPLETELY." } } ], "minutes": { "strip": 45, "rebuild": 70, "basis": "estimated", "note": "Estimate: field strip (locking pins, butt plate, bolt carrier, sear mechanism), bolt strip, barrel-rail group, charging handle, ejection cover, sights/rail, muzzle device. Rebuild longer: sear mechanism must go in cocked, captive pins and the carrier stop.", "source": null }, "stripScope": [ { "assembly": "Sear mechanism", "removes": [ "sear mechanism (removed as a unit; hammer kept cocked)" ] }, { "assembly": "Bolt carrier", "removes": [ "bolt, firing pin and spring, cam pin, extractor", "bolt carrier stop assembly" ] }, { "assembly": "Body and barrel-rail group", "removes": [ "locking pins (left captive)", "butt plate", "charging handle", "ejection port cover and spring", "barrel-rail group with adapter screws", "muzzle device" ], "tools": [ "3 mm Allen key", "T-handle/headspace gauges if the bolt changes" ] } ], "hardware": { "pins": 6, "springs": 5, "detents": 0, "basis": "counted from the manufacturer's parts list (one per key number unless a quantity is given)" }, "specialTools": [ { "tool": "3 mm Allen wrench", "usedFor": "Rail/adapter retaining screws" }, { "tool": "GO/NO-GO headspace gauges", "usedFor": "If a new bolt is fitted" } ], "fitOnRebuild": [ { "check": "Headspace if a new bolt is fitted", "why": "IWI requires GO/NO-GO checks with a new bolt", "source": { "title": "IWI US Tavor X95 Operator Manual", "publisher": "IWI US, Inc.", "reliability": "primary", "url": "https://iwi.us/wp-content/uploads/2024/01/IWI-Tavor-X95-Manual.pdf", "page": null, "pdfPage": null, "pageUrl": null, "quote": "Always have the headspace checked by" } }, { "check": "Sear mechanism installed cocked", "why": "Installing with the hammer down damages the pack", "source": { "title": "IWI US Tavor X95 Operator Manual", "publisher": "IWI US, Inc.", "reliability": "primary", "url": "https://iwi.us/wp-content/uploads/2024/01/IWI-Tavor-X95-Manual.pdf", "page": null, "pdfPage": null, "pageUrl": null, "quote": "Be sure the hammer is cocked during" } }, { "check": "Optic/rail re-zero", "why": "Rail removal shifts zero", "source": null } ], "assessed": "2026-10-29" }, "videos": [ { "title": "IWI US Expert's Corner: Tavor X95 Disassembly & Assembly", "url": "https://www.youtube.com/watch?v=gdtQIvfERAk", "platform": "youtube", "embedUrl": null, "shows": [ "field-strip", "reassembly" ], "appliesTo": "Tavor X95 (per description)", "published": "2018-07-17", "note": null, "channel": { "id": "UCp6VBnbvSj7XYUahhekxAZQ", "name": "IWI US", "url": "https://www.youtube.com/@IWIUS", "owner": "IWI US, Inc. (US subsidiary)" }, "accessed": "2026-10-15" }, { "title": "IWI US Expert's Corner: IWI Tavor X95 Bolt Group Variants", "url": "https://www.youtube.com/watch?v=frCVqpdyW-0", "platform": "youtube", "embedUrl": null, "shows": [ "detail-strip", "detail-reassembly" ], "appliesTo": "Tavor X95, both bolt-group generations (per description chapters)", "published": "2024-04-22", "note": null, "channel": { "id": "UCp6VBnbvSj7XYUahhekxAZQ", "name": "IWI US", "url": "https://www.youtube.com/@IWIUS", "owner": "IWI US, Inc. (US subsidiary)" }, "accessed": "2026-10-15" }, { "title": "IWI US Expert's Corner: Tavor X95 Trigger Removal and Installation", "url": "https://www.youtube.com/watch?v=bZaHE36iin4", "platform": "youtube", "embedUrl": null, "shows": [ "detail-strip", "detail-reassembly" ], "appliesTo": "Tavor X95", "published": "2024-09-24", "note": null, "channel": { "id": "UCp6VBnbvSj7XYUahhekxAZQ", "name": "IWI US", "url": "https://www.youtube.com/@IWIUS", "owner": "IWI US, Inc. (US subsidiary)" }, "accessed": "2026-10-15" }, { "title": "IWI US Expert's Corner: Tavor X95 Bolt Catch Assembly", "url": "https://www.youtube.com/watch?v=xVmXd8iJx-g", "platform": "youtube", "embedUrl": null, "shows": [ "detail-strip", "detail-reassembly" ], "appliesTo": "Tavor X95 (per description)", "published": "2018-08-01", "note": null, "channel": { "id": "UCp6VBnbvSj7XYUahhekxAZQ", "name": "IWI US", "url": "https://www.youtube.com/@IWIUS", "owner": "IWI US, Inc. (US subsidiary)" }, "accessed": "2026-10-15" }, { "title": "IWI US Expert's Corner: Tavor X95 Barrel Removal", "url": "https://www.youtube.com/watch?v=EbEoO9dpr3w", "platform": "youtube", "embedUrl": null, "shows": [ "detail-strip" ], "appliesTo": "Tavor X95 (per description)", "published": "2018-10-15", "note": null, "channel": { "id": "UCp6VBnbvSj7XYUahhekxAZQ", "name": "IWI US", "url": "https://www.youtube.com/@IWIUS", "owner": "IWI US, Inc. (US subsidiary)" }, "accessed": "2026-10-15" }, { "title": "IWI US Expert's Corner: X95 9mm Right to Left Hand Conversion", "url": "https://www.youtube.com/watch?v=W6cjX8rge3I", "platform": "youtube", "embedUrl": null, "shows": [ "adjustment" ], "appliesTo": "Tavor X95 9mm only (per title/description)", "published": "2018-11-30", "note": null, "channel": { "id": "UCp6VBnbvSj7XYUahhekxAZQ", "name": "IWI US", "url": "https://www.youtube.com/@IWIUS", "owner": "IWI US, Inc. (US subsidiary)" }, "accessed": "2026-10-15" } ], "configurations": [], "tools": [ { "name": "None for field stripping", "required": false, "usedFor": "IWI states no special tools are required to field strip the X95." }, { "name": "3 mm punch, 5 mm punch and a plastic hammer", "required": false, "usedFor": "Only for converting the recoil mechanism to opposite-hand ejection. Not needed for cleaning." } ], "phases": [ { "id": "clear", "title": "Clear and make safe", "steps": [ { "n": 1, "instruction": "Point the muzzle in a safe direction and keep your finger off the trigger." }, { "n": 2, "instruction": "Remove the magazine." }, { "n": 3, "instruction": "Pull the charging handle fully to the rear and lock the action open." }, { "n": 4, "instruction": "Inspect the chamber and magazine well with a light, then physically confirm the chamber is empty.", "warning": "On a bullpup the chamber sits behind the trigger, beside your face. Look at it deliberately." }, { "n": 5, "instruction": "Remove all live ammunition from the work area." } ], "videos": [] }, { "id": "disassemble", "title": "Disassemble", "videos": [ { "title": "IWI US Expert's Corner: Tavor X95 Disassembly & Assembly", "url": "https://www.youtube.com/watch?v=gdtQIvfERAk", "platform": "youtube", "embedUrl": null, "shows": [ "field-strip", "reassembly" ], "appliesTo": "Tavor X95 (per description)", "published": "2018-07-17", "note": null, "channel": { "id": "UCp6VBnbvSj7XYUahhekxAZQ", "name": "IWI US", "url": "https://www.youtube.com/@IWIUS", "owner": "IWI US, Inc. (US subsidiary)" }, "accessed": "2026-10-15" }, { "title": "IWI US Expert's Corner: IWI Tavor X95 Bolt Group Variants", "url": "https://www.youtube.com/watch?v=frCVqpdyW-0", "platform": "youtube", "embedUrl": null, "shows": [ "detail-strip", "detail-reassembly" ], "appliesTo": "Tavor X95, both bolt-group generations (per description chapters)", "published": "2024-04-22", "note": null, "channel": { "id": "UCp6VBnbvSj7XYUahhekxAZQ", "name": "IWI US", "url": "https://www.youtube.com/@IWIUS", "owner": "IWI US, Inc. (US subsidiary)" }, "accessed": "2026-10-15" }, { "title": "IWI US Expert's Corner: Tavor X95 Trigger Removal and Installation", "url": "https://www.youtube.com/watch?v=bZaHE36iin4", "platform": "youtube", "embedUrl": null, "shows": [ "detail-strip", "detail-reassembly" ], "appliesTo": "Tavor X95", "published": "2024-09-24", "note": null, "channel": { "id": "UCp6VBnbvSj7XYUahhekxAZQ", "name": "IWI US", "url": "https://www.youtube.com/@IWIUS", "owner": "IWI US, Inc. (US subsidiary)" }, "accessed": "2026-10-15" }, { "title": "IWI US Expert's Corner: Tavor X95 Bolt Catch Assembly", "url": "https://www.youtube.com/watch?v=xVmXd8iJx-g", "platform": "youtube", "embedUrl": null, "shows": [ "detail-strip", "detail-reassembly" ], "appliesTo": "Tavor X95 (per description)", "published": "2018-08-01", "note": null, "channel": { "id": "UCp6VBnbvSj7XYUahhekxAZQ", "name": "IWI US", "url": "https://www.youtube.com/@IWIUS", "owner": "IWI US, Inc. (US subsidiary)" }, "accessed": "2026-10-15" }, { "title": "IWI US Expert's Corner: Tavor X95 Barrel Removal", "url": "https://www.youtube.com/watch?v=EbEoO9dpr3w", "platform": "youtube", "embedUrl": null, "shows": [ "detail-strip" ], "appliesTo": "Tavor X95 (per description)", "published": "2018-10-15", "note": null, "channel": { "id": "UCp6VBnbvSj7XYUahhekxAZQ", "name": "IWI US", "url": "https://www.youtube.com/@IWIUS", "owner": "IWI US, Inc. (US subsidiary)" }, "accessed": "2026-10-15" } ], "procedures": [ { "procedure": "field-strip", "title": "Field Strip", "level": "field-strip", "configuration": false, "steps": [ { "n": 1, "instruction": "Complete the Unloading and Safety Check." }, { "n": 2, "instruction": "Press the two locking pins on the RIGHT side of the rifle and pull them through to the LEFT until they stop.", "warning": "Do not pull the locking pins out completely. IWI capitalises this. They are meant to stay captive in the body." }, { "n": 3, "instruction": "Open the bolt carrier stop lever." }, { "n": 4, "instruction": "Pull the sear mechanism out of the rifle.", "warning": "Once it is out, do NOT release the hammer. IWI states this will damage the housing.", "partsFreed": [ "Sear mechanism" ] }, { "n": 5, "instruction": "Push the butt locking pin on the RIGHT side and pull it through to the LEFT until it stops.", "warning": "Again, not all the way out." }, { "n": 6, "instruction": "Open the butt." }, { "n": 7, "instruction": "Pull the recoil mechanism out of the rifle.", "partsFreed": [ "Recoil mechanism" ] }, { "n": 8, "instruction": "Clean the chamber and the locking lugs on the barrel extension, the bore from the chamber end, and the interior of the body.", "tip": "IWI's kit includes a chamber and barrel-extension brush and an internal receiver brush for exactly this." } ] }, { "procedure": "bolt-strip", "title": "Recoil Mechanism and Bolt Disassembly", "level": "detail-strip", "configuration": false, "steps": [ { "n": 1, "instruction": "Remove the recoil mechanism from the rifle first." }, { "n": 2, "instruction": "Set the recoil mechanism into its rearward position: pull the bolt rotation control bar to the rear until it stops, flush with the buffer, then continue pulling through slight resistance until it snaps into the removal notch in the buffer.", "tip": "Correctly set, the rear of the bar protrudes about 1.43 inches through the back of the buffer. That protrusion is the confirmation." }, { "n": 3, "instruction": "Push out the bolt guiding pin.", "partsFreed": [ "Bolt guiding pin" ] }, { "n": 4, "instruction": "Extract the bolt assembly and firing pin unit from the bolt carrier.", "partsFreed": [ "Bolt assembly", "Firing pin unit" ] }, { "n": 5, "instruction": "Separate the firing pin spring from the firing pin.", "partsFreed": [ "Firing pin spring" ] }, { "n": 6, "instruction": "Clean and lubricate, then reassemble in reverse order.", "warning": "If a NEW bolt has been fitted, the rifle must be headspace-checked with GO and NO-GO gauges before firing." } ] } ] }, { "id": "refinish", "title": "Refinish", "components": [ { "name": "Sear mechanism", "procedure": "field-strip", "level": "field-strip", "step": 4 }, { "name": "Recoil mechanism", "procedure": "field-strip", "level": "field-strip", "step": 7 }, { "name": "Bolt guiding pin", "procedure": "bolt-strip", "level": "detail-strip", "step": 3 }, { "name": "Bolt assembly", "procedure": "bolt-strip", "level": "detail-strip", "step": 4 }, { "name": "Firing pin unit", "procedure": "bolt-strip", "level": "detail-strip", "step": 4 }, { "name": "Firing pin spring", "procedure": "bolt-strip", "level": "detail-strip", "step": 5 } ], "manufacturerPartsList": { "parts": 42, "scope": "Section 15.1 TAVOR X95 5.56 NATO (#/Description/Qty table). Omitted: 15.2 X95 .300 BLK (p. 96) and 15.3 X95 9mm Para (p. 97) exploded-view tables." }, "partsDiagrams": [], "materials": [ { "component": "Barrel", "material": "CrMoV", "finish": "Chrome lined", "appliesTo": "Tavor X95 5.56 NATO 16.5in, models XB16, XFD16, XG16 (same text for 18.5in and 13in SBR)", "note": null, "source": { "title": "Tavor X95 Modern Bullpup 5.56, 300Blk & 9mm Rifles | IWI US (Technical Specifications)", "publisher": "IWI US, Inc.", "reliability": "primary", "url": "https://iwi.us/firearms/tavor-x95/", "page": null, "pdfPage": null, "pageUrl": null, "quote": "Barrel Material … Chrome lined, Cold hammer forged, CrMoV" } }, { "component": "Stock/Chassis", "material": "polymer", "finish": null, "appliesTo": "Tavor X95 5.56 NATO 16.5in, models XB16, XFD16, XG16 (same text for 18.5in and 13in SBR)", "note": null, "source": { "title": "Tavor X95 Modern Bullpup 5.56, 300Blk & 9mm Rifles | IWI US (Technical Specifications)", "publisher": "IWI US, Inc.", "reliability": "primary", "url": "https://iwi.us/firearms/tavor-x95/", "page": null, "pdfPage": null, "pageUrl": null, "quote": "Stock Type … Reinforced polymer bullpup configuration" } }, { "component": "Magazine", "material": "Polymer", "finish": null, "appliesTo": "Tavor X95 5.56 NATO 16.5in, models XB16, XFD16, XG16 (same text for 18.5in and 13in SBR)", "note": null, "source": { "title": "Tavor X95 Modern Bullpup 5.56, 300Blk & 9mm Rifles | IWI US (Technical Specifications)", "publisher": "IWI US, Inc.", "reliability": "primary", "url": "https://iwi.us/firearms/tavor-x95/", "page": null, "pdfPage": null, "pageUrl": null, "quote": "Magazine Type … Polymer NATO STANAG" } } ], "note": "The components the procedures above separate. Coating, masking and cure are outside this database; follow your coating system's instructions. A part the manufacturer marks \"factory fit\" should not be swapped or reworked." }, { "id": "reassemble", "title": "Reassemble", "videos": [ { "title": "IWI US Expert's Corner: Tavor X95 Disassembly & Assembly", "url": "https://www.youtube.com/watch?v=gdtQIvfERAk", "platform": "youtube", "embedUrl": null, "shows": [ "field-strip", "reassembly" ], "appliesTo": "Tavor X95 (per description)", "published": "2018-07-17", "note": null, "channel": { "id": "UCp6VBnbvSj7XYUahhekxAZQ", "name": "IWI US", "url": "https://www.youtube.com/@IWIUS", "owner": "IWI US, Inc. (US subsidiary)" }, "accessed": "2026-10-15" }, { "title": "IWI US Expert's Corner: IWI Tavor X95 Bolt Group Variants", "url": "https://www.youtube.com/watch?v=frCVqpdyW-0", "platform": "youtube", "embedUrl": null, "shows": [ "detail-strip", "detail-reassembly" ], "appliesTo": "Tavor X95, both bolt-group generations (per description chapters)", "published": "2024-04-22", "note": null, "channel": { "id": "UCp6VBnbvSj7XYUahhekxAZQ", "name": "IWI US", "url": "https://www.youtube.com/@IWIUS", "owner": "IWI US, Inc. (US subsidiary)" }, "accessed": "2026-10-15" }, { "title": "IWI US Expert's Corner: Tavor X95 Trigger Removal and Installation", "url": "https://www.youtube.com/watch?v=bZaHE36iin4", "platform": "youtube", "embedUrl": null, "shows": [ "detail-strip", "detail-reassembly" ], "appliesTo": "Tavor X95", "published": "2024-09-24", "note": null, "channel": { "id": "UCp6VBnbvSj7XYUahhekxAZQ", "name": "IWI US", "url": "https://www.youtube.com/@IWIUS", "owner": "IWI US, Inc. (US subsidiary)" }, "accessed": "2026-10-15" }, { "title": "IWI US Expert's Corner: Tavor X95 Bolt Catch Assembly", "url": "https://www.youtube.com/watch?v=xVmXd8iJx-g", "platform": "youtube", "embedUrl": null, "shows": [ "detail-strip", "detail-reassembly" ], "appliesTo": "Tavor X95 (per description)", "published": "2018-08-01", "note": null, "channel": { "id": "UCp6VBnbvSj7XYUahhekxAZQ", "name": "IWI US", "url": "https://www.youtube.com/@IWIUS", "owner": "IWI US, Inc. (US subsidiary)" }, "accessed": "2026-10-15" } ], "procedures": [ { "procedure": "bolt-strip", "title": "Recoil Mechanism and Bolt Disassembly", "configuration": false, "steps": null, "instruction": "Reverse the steps of \"Recoil Mechanism and Bolt Disassembly\"." }, { "procedure": "reassembly", "title": "Reassembly", "configuration": false, "steps": [ { "n": 1, "instruction": "Set the recoil mechanism into its forward position." }, { "n": 2, "instruction": "Slide the recoil mechanism forward into the body through the rear." }, { "n": 3, "instruction": "Close the butt and push the butt locking pin back through to secure it." }, { "n": 4, "instruction": "Cock the hammer.", "warning": "IWI's caution: be sure the hammer is cocked during installation of the sear mechanism." }, { "n": 5, "instruction": "Place the sear mechanism inside the rifle body." }, { "n": 6, "instruction": "Close the bolt carrier stop lever." }, { "n": 7, "instruction": "Push the locking pins all the way into the body to secure the sear mechanism and the bolt carrier stop lever." }, { "n": 8, "instruction": "Perform the complete function test before firing." } ], "instruction": null } ] }, { "id": "torque", "title": "Torque", "coverage": "none-recorded", "manufacturer": [], "reported": [], "notes": "The manufacturer's documents give no torque value. They say: \"Verify the flash suppressor locking nut is properly tightened.\" (IWI US Tavor X95 Operator Manual, PDF p. 37 (inspection checklist item 14)) \"Place two spring washers and two connecting screws on the rail, tighten using a 4 mm Allen wrench.\" (IWI US Tavor X95 Operator Manual, PDF p. 84 (rail assembly))" }, { "id": "function-check", "title": "Function check", "checks": [ "Verify the rifle is unloaded with no magazine inserted before each step.", "Cycle the action by hand and confirm the bolt locks and returns fully to battery.", "With the selector on safe, press the trigger. The hammer or striker must not release.", "Move the selector to fire, cycle the action, and press the trigger. It should release.", "Hold the trigger back, cycle the action, and release slowly to feel the disconnector reset.", "Confirm the magazine seats and locks positively, and that any hold-open engages on an empty magazine.", "Confirm the buttplate is securely latched." ], "videos": [] } ], "troubleshooting": [ { "symptom": "The sear mechanism will not go back into the body.", "cause": "The hammer is not cocked.", "fix": "Cock the hammer, then place the sear mechanism in, close the bolt carrier stop lever, and push the locking pins home.", "damageRisk": "Forcing it against an uncocked hammer bears on the sear housing." }, { "symptom": "The hammer was released while the sear mechanism was out.", "cause": "Nothing was retaining it.", "fix": "Inspect the housing for damage before reassembling. IWI states this damages the housing, so it is not something to assume got away with.", "damageRisk": "IWI names this specifically as a damage mode.", "seeGunsmith": true }, { "symptom": "A locking pin came all the way out of the rifle.", "cause": "It was pulled past its stop. IWI's instruction is to pull only until it stops.", "fix": "Re-enter the pin from the left and push it back through until it seats. Check it moves to its stop and no further next time." }, { "symptom": "The bolt carrier stop assembly came out of the rifle.", "cause": "It was disturbed while the sear mechanism was removed.", "fix": "Hold the bolt carrier stop lever open with your middle finger, slide the head of the bolt carrier stop under the step of the insert, then push upwards so it snaps into place." }, { "symptom": "The bolt will not come out of the carrier.", "cause": "The recoil mechanism is not set into its rearward position, so the bolt guiding pin is not clear.", "fix": "Pull the bolt rotation control bar rearward until it snaps into the removal notch in the buffer — the rear of the bar should protrude about 1.43 inches — then push out the bolt guiding pin." } ], "sources": [ { "n": 1, "id": "iwi-x95-manual", "title": "IWI US Tavor X95 Operator Manual", "publisher": "IWI US, Inc.", "reliability": "primary", "url": "https://iwi.us/wp-content/uploads/2024/01/IWI-Tavor-X95-Manual.pdf", "accessed": "2026-09-15" }, { "n": 2, "id": "iwi-specs-dd8425", "title": "Tavor X95 Modern Bullpup 5.56, 300Blk & 9mm Rifles | IWI US (Technical Specifications)", "publisher": "IWI US, Inc.", "reliability": "primary", "url": "https://iwi.us/firearms/tavor-x95/", "accessed": "2026-10-03" } ] }