{ "apiVersion": 1, "kind": "work-order", "purpose": "Taking the firearm apart for a job such as refinishing, and putting it back together to specification.", "firearm": { "slug": "savage-mark-ii", "name": "Savage Mark II", "manufacturer": { "id": "savage", "name": "Savage Arms" }, "category": "rimfire-rifle", "action": "bolt-action", "calibers": [ ".22 Long Rifle" ], "alsoKnownAs": [ "Mark II FV", "Savage 93 (.22 WMR)", "Savage B22" ], "coversAlso": [ "Savage Model 93 in .22 WMR", "Savage B22 series" ], "page": "firearms/savage-mark-ii.html", "bundle": "api/v1/firearms/savage-mark-ii.json", "lastUpdated": "2026-10-29" }, "notices": [ "Savage Arms limits owner disassembly: Bolt out of the receiver and action out of the stock (stock screws); bolt itself not disassembled.", "This work order is written for the Savage Mark II. It is reported to cover Savage Model 93 in .22 WMR; Savage B22 series — if the firearm on the bench is one of those, check the torque notes: values do not always carry over." ], "disclaimer": { "headline": "Read this before you use anything here.", "points": [ "This is a guide, not an authority. Entries are compiled from manufacturer manuals, technical manuals, published references, and community knowledge. Some of it comes from sources that are not authoritative, and some of it may simply be wrong.", "Always consult the manufacturer's manual for your specific firearm and serial-number range. Manufacturers change designs mid-production without renaming the model. The manual that shipped with your firearm outranks anything on this site.", "Consult a licensed gunsmith for anything beyond routine field stripping and cleaning, for any firearm you are unsure about, and for any procedure marked as gunsmith-recommended here.", "Treat every firearm as loaded. Verify it is unloaded, with the magazine removed and the chamber physically and visually checked, before any procedure in this database. Point it in a safe direction the entire time.", "Disassembly can damage a firearm or injure you. Springs are under tension, parts can launch, and reassembling a firearm incorrectly can make it unsafe to fire in a way that is not obvious from the outside. If a reassembled firearm does not pass a function check, stop and see a gunsmith.", "Torque values are shown in two groups. Values from the manufacturer or the issuing military are shown as such, with the document they came from. Values reported by anyone else — parts makers, gunsmithing publishers, articles, forums — are shown separately with who said them, how reliable that source is, and their exact words. Those are not specifications. Confirm any torque value with the manufacturer or a licensed gunsmith before relying on it.", "Nothing here is legal advice. Firearms law varies by country, state, and city, and some modifications or configurations are regulated or prohibited. You are responsible for knowing and following the law where you are.", "No warranty of any kind. Contributors and maintainers accept no liability for damage, injury, or loss arising from use of this material." ], "page": "disclaimer.html", "legal": { "summary": "Legal notice: this material is third-party information compiled from sources of varying reliability and is provided for general informational and educational purposes only. It is not gunsmithing, technical, safety or legal advice, it is not verified or endorsed by any manufacturer, and it must not be taken as fact. Any work on a firearm beyond the routine field stripping described in its own owner's manual should be performed only by a licensed and insured gunsmith. You use this material entirely at your own risk. Fundamental Build LLC and the project's contributors make no warranty of any kind and accept no liability for death, injury, damage or loss arising from its use. Full terms: LEGAL.md.", "page": "legal.html", "notice": "https://github.com/Fundamental-build-LLC/Pew-Takedown/blob/main/LEGAL.md" } }, "sourcing": { "confidence": "high", "verification": "manufacturer-manual-verified" }, "manufacturerDisassembly": { "status": "limited", "limit": "Bolt out of the receiver and action out of the stock (stock screws); bolt itself not disassembled.", "statement": "Savage tells owners not to disassemble the bolt assembly; in-depth mechanical work should go to a qualified gunsmith or Savage's service department.", "source": { "title": "Savage Arms Bolt-Action Rimfire Manual — Mark I, Rascal, Mark II, Model 93, B.Mag", "publisher": "Savage Arms, Inc.", "reliability": "primary", "url": "https://saweb.s3.us-east-1.amazonaws.com/manuals/manual_rimfire_boltaction.pdf", "page": "35", "pdfPage": 37, "pageUrl": "https://saweb.s3.us-east-1.amazonaws.com/manuals/manual_rimfire_boltaction.pdf#page=37", "quote": "DO NOT DISASSEMBLE THE BOLT ASSEMBLY." } }, "recalls": [], "shopTier": { "tier": 1, "group": "rimfire-rifle", "rating": "Pew-Takedown editorial rating (1 easy – 3 hardest), not the manufacturer's", "reason": "Simple bolt-action rimfire: 23 listed parts, action out of the stock on screws, bolt out by holding the trigger. The only traps are the trigger-as-bolt-release and the bolt's alignment (handle, firing pin at top centre) on reinstallation.", "confidence": "high", "partCount": { "value": 23, "kind": "line-items", "covers": "Mark II list in the Savage bolt-action rimfire manual (assembly-level list)", "basis": "manufacturer-parts-list", "source": { "title": "Savage Arms Bolt-Action Rimfire Manual — Mark I, Rascal, Mark II, Model 93, B.Mag", "publisher": "Savage Arms, Inc.", "reliability": "primary", "url": "https://saweb.s3.us-east-1.amazonaws.com/manuals/manual_rimfire_boltaction.pdf", "page": "18–19", "pdfPage": 20, "pageUrl": "https://saweb.s3.us-east-1.amazonaws.com/manuals/manual_rimfire_boltaction.pdf#page=20", "quote": "529 Swivel studs" } }, "painPoints": [], "minutes": { "strip": 20, "rebuild": 30, "basis": "estimated", "note": "Action out of the stock, bolt stripped, AccuTrigger left as a unit, sights/base; simplest rimfire strip.", "source": null }, "stripScope": [ { "assembly": "Stock", "removes": [ "action screws", "barrelled action out of the stock" ] }, { "assembly": "Action", "removes": [ "bolt (trigger held)", "AccuTrigger (unit)", "magazine latch", "scope base / sights" ] }, { "assembly": "Bolt", "removes": [ "firing pin assembly", "extractor" ] } ], "hardware": { "pins": 0, "springs": 2, "detents": 0, "basis": "counted from the manufacturer's parts list (one per key number unless a quantity is given)" }, "specialTools": [ { "tool": "Torque driver", "usedFor": "Action screws" } ], "fitOnRebuild": [ { "check": "Action screw torque", "why": "Inconsistent action-screw torque is a common cause of a rifle that will not hold zero.", "source": null }, { "check": "Re-zero", "why": "Scope base or sights removed.", "source": null } ], "assessed": "2026-10-29" }, "videos": [ { "title": "Bolt Removal: Savage Bolt Action Rimfire", "url": "https://www.youtube.com/watch?v=tc3XL4-XD8c", "platform": "youtube", "embedUrl": null, "shows": [ "field-strip" ], "appliesTo": "Savage Mark I, Mark II, Rascal, Model 93 (per the description)", "published": "2020-12-02", "note": null, "channel": { "id": "UC4pGumWLZVQj3M00xds64aw", "name": "SavageAccuracy (Savage Arms)", "url": "https://www.youtube.com/@SavageAccuracy", "owner": "Savage Arms, Inc." }, "accessed": "2026-10-15" }, { "title": "Stock Removal: Savage Bolt Action", "url": "https://www.youtube.com/watch?v=IjHzcwz_2Bk", "platform": "youtube", "embedUrl": null, "shows": [ "field-strip", "detail-strip" ], "appliesTo": "Savage bolt-action rifles incl. rimfire (rimfire action-screw torque 18-20 in-lb per the description)", "published": "2020-12-03", "note": null, "channel": { "id": "UC4pGumWLZVQj3M00xds64aw", "name": "SavageAccuracy (Savage Arms)", "url": "https://www.youtube.com/@SavageAccuracy", "owner": "Savage Arms, Inc." }, "accessed": "2026-10-15" }, { "title": "How to Adjust the AccuTrigger on Savage Bolt Action Rimfire Rifles", "url": "https://www.youtube.com/watch?v=SNZ_IENSGG4", "platform": "youtube", "embedUrl": null, "shows": [ "adjustment" ], "appliesTo": "Savage Rascal, Mark I, Mark II, Model 93, 93R17 with AccuTrigger (per the description)", "published": "2022-08-15", "note": null, "channel": { "id": "UC4pGumWLZVQj3M00xds64aw", "name": "SavageAccuracy (Savage Arms)", "url": "https://www.youtube.com/@SavageAccuracy", "owner": "Savage Arms, Inc." }, "accessed": "2026-10-15" }, { "title": "How to Adjust the AccuTrigger on B Series Rifles", "url": "https://www.youtube.com/watch?v=z0_aXB1hmIY", "platform": "youtube", "embedUrl": null, "shows": [ "adjustment" ], "appliesTo": "Savage B22, B22 Magnum, B17 (per the description)", "published": "2022-09-26", "note": null, "channel": { "id": "UC4pGumWLZVQj3M00xds64aw", "name": "SavageAccuracy (Savage Arms)", "url": "https://www.youtube.com/@SavageAccuracy", "owner": "Savage Arms, Inc." }, "accessed": "2026-10-15" } ], "configurations": [], "tools": [ { "name": "Bore guide", "required": true, "usedFor": "Cleaning from the breech without damaging the throat or the crown.", "substitute": "There is no good substitute. A rod run into an unguided chamber scrapes the throat." }, { "name": "Hex key or screwdriver matching the action screws", "required": false, "usedFor": "Removing the barrelled action from the stock. Not needed for routine cleaning." }, { "name": "Torque wrench", "required": false, "usedFor": "Reinstalling action screws to a consistent value, which is an accuracy variable on every bolt rifle." } ], "phases": [ { "id": "clear", "title": "Clear and make safe", "steps": [ { "n": 1, "instruction": "Point the muzzle in a safe direction and keep your finger off the trigger." }, { "n": 2, "instruction": "Place the safety in the on position." }, { "n": 3, "instruction": "Lift the bolt handle and draw the bolt fully rearward, extracting and ejecting any chambered round." }, { "n": 4, "instruction": "Remove the detachable magazine.", "partsFreed": [ "Magazine contents" ] }, { "n": 5, "instruction": "Inspect the chamber and magazine well with a light and physically confirm the chamber is empty.", "warning": "Look and feel. Both, every time." }, { "n": 6, "instruction": "Remove all live ammunition from the work area." } ], "videos": [] }, { "id": "disassemble", "title": "Disassemble", "videos": [ { "title": "Bolt Removal: Savage Bolt Action Rimfire", "url": "https://www.youtube.com/watch?v=tc3XL4-XD8c", "platform": "youtube", "embedUrl": null, "shows": [ "field-strip" ], "appliesTo": "Savage Mark I, Mark II, Rascal, Model 93 (per the description)", "published": "2020-12-02", "note": null, "channel": { "id": "UC4pGumWLZVQj3M00xds64aw", "name": "SavageAccuracy (Savage Arms)", "url": "https://www.youtube.com/@SavageAccuracy", "owner": "Savage Arms, Inc." }, "accessed": "2026-10-15" }, { "title": "Stock Removal: Savage Bolt Action", "url": "https://www.youtube.com/watch?v=IjHzcwz_2Bk", "platform": "youtube", "embedUrl": null, "shows": [ "field-strip", "detail-strip" ], "appliesTo": "Savage bolt-action rifles incl. rimfire (rimfire action-screw torque 18-20 in-lb per the description)", "published": "2020-12-03", "note": null, "channel": { "id": "UC4pGumWLZVQj3M00xds64aw", "name": "SavageAccuracy (Savage Arms)", "url": "https://www.youtube.com/@SavageAccuracy", "owner": "Savage Arms, Inc." }, "accessed": "2026-10-15" } ], "procedures": [ { "procedure": "field-strip", "title": "Field Strip", "level": "field-strip", "configuration": false, "steps": [ { "n": 1, "instruction": "Complete the Clear and Make Safe procedure. There must be no ammunition in the chamber or the magazine." }, { "n": 2, "instruction": "Move the two-position safety fully forward to SAFETY OFF — READY TO FIRE, exposing the red dot. The trigger is blocked in the FULL SAFE position and the bolt will not come out.", "warning": "The rifle is now off safe." }, { "n": 3, "instruction": "Lift the bolt handle and draw the bolt to the rear." }, { "n": 4, "instruction": "With no ammunition in the rifle, firmly pull the trigger and hold it while you slide the bolt out of the rear of the receiver.", "warning": "Removing the bolt from this rifle requires pulling the trigger. The manual says so in as many words. Verify the chamber and magazine are empty, look and feel, and point the muzzle somewhere a round would not matter before your finger goes near the trigger.", "tip": "There is no bolt release lever on these rimfires. The trigger is the release.", "partsFreed": [ "Bolt assembly" ] }, { "n": 5, "instruction": "Clean the bore from the breech, and clean the bolt face and chamber." } ] }, { "procedure": "stock-removal", "title": "Remove the Barrelled Action from the Stock", "level": "detail-strip", "configuration": false, "steps": [ { "n": 1, "instruction": "Verify the rifle is unloaded and remove the bolt and magazine." }, { "n": 2, "instruction": "Remove the action screws from the bottom of the stock, noting which screw came from which hole.", "tip": "They are often different lengths.", "partsFreed": [ "Action screws", "Floorplate or magazine assembly" ] }, { "n": 3, "instruction": "Lift the barrelled action out of the stock.", "partsFreed": [ "Stock" ] } ] } ] }, { "id": "refinish", "title": "Refinish", "components": [ { "name": "Bolt assembly", "procedure": "field-strip", "level": "field-strip", "step": 4 }, { "name": "Action screws", "procedure": "stock-removal", "level": "detail-strip", "step": 2 }, { "name": "Floorplate or magazine assembly", "procedure": "stock-removal", "level": "detail-strip", "step": 2 }, { "name": "Stock", "procedure": "stock-removal", "level": "detail-strip", "step": 3 } ], "manufacturerPartsList": { "parts": 23, "scope": "Mark II list from the Savage bolt-action rimfire manual. Omitted: separate lists for Mark I (pp.14–15), Rascal (pp.16–17), Model 93 (pp.20–21) and B.Mag (Section 11)." }, "partsDiagrams": [], "materials": [ { "component": "Barrel", "material": null, "finish": "blued", "appliesTo": "Mark II F, .22 LR, SKU 26700", "note": null, "source": { "title": "Mark II F | Accurate 22 LR for Target Shooting | Savage Arms", "publisher": "Savage Arms", "reliability": "primary", "url": "https://savagearms.com/firearms/model/mark-ii-f", "page": null, "pdfPage": null, "pageUrl": null, "quote": "Button-rifled, 21-inch blued sporter barrel" } }, { "component": "Stock", "material": "Synthetic", "finish": "Black", "appliesTo": "Mark II F, .22 LR, SKU 26700", "note": null, "source": { "title": "Mark II F | Accurate 22 LR for Target Shooting | Savage Arms", "publisher": "Savage Arms", "reliability": "primary", "url": "https://savagearms.com/firearms/model/mark-ii-f", "page": null, "pdfPage": null, "pageUrl": null, "quote": "STOCK: Synthetic … STOCK COLOR: Black" } }, { "component": "Receiver", "material": null, "finish": "Black", "appliesTo": "Mark II F, .22 LR, SKU 26700", "note": null, "source": { "title": "Mark II F | Accurate 22 LR for Target Shooting | Savage Arms", "publisher": "Savage Arms", "reliability": "primary", "url": "https://savagearms.com/firearms/model/mark-ii-f", "page": null, "pdfPage": null, "pageUrl": null, "quote": "REC. COLOR: Black" } } ], "note": "The components the procedures above separate. Coating, masking and cure are outside this database; follow your coating system's instructions. A part the manufacturer marks \"factory fit\" should not be swapped or reworked." }, { "id": "reassemble", "title": "Reassemble", "videos": [], "procedures": [ { "procedure": "stock-removal", "title": "Remove the Barrelled Action from the Stock", "configuration": false, "steps": [ { "n": 4, "instruction": "To reinstall, seat the action in the stock, start both screws by hand, then tighten the front screw first and the rear second to a consistent torque.", "warning": "Inconsistent action screw torque is one of the most common causes of a rifle that will not hold zero. Consult your stock maker’s specification rather than guessing." } ], "instruction": null }, { "procedure": "reassembly", "title": "Reassembly", "configuration": false, "steps": [ { "n": 1, "instruction": "Check that the four digits engraved on the bottom of the bolt match the last four digits of the serial number on the receiver. Bolt assemblies are matched to a specific rifle.", "warning": "Fitting another rifle's bolt can cause extensive damage to the firearm and serious injury. The manual is explicit about this." }, { "n": 2, "instruction": "Confirm the bolt handle is aligned properly with the front of the bolt.", "tip": "The Rascal has a one-piece bolt and needs no alignment." }, { "n": 3, "instruction": "Hold the bolt so the firing pin is at top centre." }, { "n": 4, "instruction": "Confirm the bolt handle lines up with the bolt arm slot in the receiver." }, { "n": 5, "instruction": "With the safety in the OFF — READY TO FIRE position, firmly pull the trigger while sliding the bolt into the rear of the receiver." }, { "n": 6, "instruction": "If the bolt will not go in, remove it and recheck the alignment. Do not force it." }, { "n": 7, "instruction": "Cycle the bolt several times to confirm smooth travel, then perform the function check." } ], "instruction": null } ] }, { "id": "torque", "title": "Torque", "coverage": "sourced", "manufacturer": [ { "fastener": "Action (stock) screws (2)", "appliesTo": "Mark I, Rascal, Mark II and Model 93 (manual section 5, 'Installing the stock')", "qualifier": "approximate", "value": 18, "valueMax": null, "unit": "in-lb", "converted": { "value": { "N-m": 2, "in-lb": 18, "ft-lb": 1.5 }, "valueMax": null }, "sequence": "Place the action into the stock. Replace both screws, tightening only to secure the stock but not enough to indent the stock or magazine retaining plate. Cycle the bolt several times, then verify both safety positions.", "threadlocker": null, "source": { "title": "Savage Arms Bolt-Action Rimfire Manual — Mark I, Rascal, Mark II, Model 93, B.Mag", "publisher": "Savage Arms, Inc.", "reliability": "primary", "url": "https://saweb.s3.us-east-1.amazonaws.com/manuals/manual_rimfire_boltaction.pdf", "page": "12", "pdfPage": 14, "pageUrl": "https://saweb.s3.us-east-1.amazonaws.com/manuals/manual_rimfire_boltaction.pdf#page=14", "quote": "Replace both screws, tightening only to secure the stock (approximately 18 inch pounds) but not enough to indent the stock or MAGAZINE RETAINING PLATE." } }, { "fastener": "Action screws", "appliesTo": "All Mark I, II, 93, and B-Series (B22, B17) models", "qualifier": "exact", "value": 15, "valueMax": null, "unit": "in-lb", "converted": { "value": { "N-m": 1.7, "in-lb": 15, "ft-lb": 1.2 }, "valueMax": null }, "sequence": null, "threadlocker": null, "source": { "title": "What is the torque spec for my action screws?", "publisher": "Savage Arms (service.savagearms.com help center)", "reliability": "primary", "url": "https://service.savagearms.com/hc/en-us/articles/214238343-What-is-the-torque-spec-for-my-action-screws", "page": null, "pdfPage": null, "pageUrl": null, "quote": "All Mark I, II, 93, and B-Series (B22, B17) models 15 inch pounds" } } ], "reported": [ { "fastener": "Action screws (front and rear)", "appliesTo": "Savage Mark II in an MDT Oryx chassis", "qualifier": "range", "value": 15, "valueMax": 45, "unit": "in-lb", "converted": { "value": { "N-m": 1.7, "in-lb": 15, "ft-lb": 1.2 }, "valueMax": { "N-m": 5.1, "in-lb": 45, "ft-lb": 3.7 } }, "sequence": "Push the action rearward against the recoil lug and torque the front action screw first, then the rear (manual p. 1: 'first torquing the front then the rear action screw').", "threadlocker": null, "source": { "title": "MDT Oryx Chassis System — User Manual (13694, Version 07.14.26), attached to MDT help-centre article 'ORYX Chassis Installation Guides'", "publisher": "MDT Sporting Goods Ltd. (Modular Driven Technologies, MDT)", "reliability": "secondary", "url": "https://support.mdttac.com/hc/article_attachments/51468856863892", "page": "PDF p. 2 (inlet-specific torque table)", "pdfPage": 2, "pageUrl": "https://support.mdttac.com/hc/article_attachments/51468856863892#page=2", "quote": "Savage Mark II — 5/32” Hex Wrench — 15-45 inch-pounds" } }, { "fastener": "Action screws (front and rear)", "appliesTo": "Savage Mark II in an MDT Field Stock", "qualifier": "range", "value": 20, "valueMax": 45, "unit": "in-lb", "converted": { "value": { "N-m": 2.3, "in-lb": 20, "ft-lb": 1.7 }, "valueMax": { "N-m": 5.1, "in-lb": 45, "ft-lb": 3.7 } }, "sequence": "Front then rear.", "threadlocker": null, "source": { "title": "MDT Field Stock — User Manual (13739, Version 03.3.26), attached to MDT help-centre article 'Field Stock Installation' (image-only PDF; read from the rendered page)", "publisher": "MDT Sporting Goods Ltd. (Modular Driven Technologies, MDT)", "reliability": "secondary", "url": "https://support.mdttac.com/hc/article_attachments/51745558131092", "page": "PDF p. 2 (inlet-specific torque table)", "pdfPage": 2, "pageUrl": "https://support.mdttac.com/hc/article_attachments/51745558131092#page=2", "quote": "Savage MK II — 3/32” Hex Wrench — 20-45 inch-pounds" } } ], "notes": "Savage's two published figures for the action screws differ: the bolt-action rimfire manual says approximately 18 inch-pounds, and Savage's help-center answer says 15 inch-pounds for Mark I, II, 93 and B-Series rifles. Both are shown with their sources. Use the lower figure or ask Savage which applies to your rifle." }, { "id": "function-check", "title": "Function check", "checks": [ "Verify the rifle is unloaded and the magazine is empty before each check.", "Cycle the bolt and confirm it cocks and closes fully into battery.", "With the action cocked, engage the safety and press the trigger. The firing pin must not release.", "Disengage the safety without touching the trigger. The firing pin must not release.", "Press the trigger and confirm the firing pin releases cleanly.", "Confirm the bolt release retains the bolt.", "Load dummy rounds and confirm they feed from the magazine and eject cleanly." ], "videos": [] } ], "troubleshooting": [ { "symptom": "The bolt will not come out of the receiver.", "cause": "You are looking for a bolt release lever. These rimfires do not have one — the trigger is the release.", "fix": "With the safety forward and no ammunition present, pull the trigger firmly and hold it while sliding the bolt out of the rear of the receiver." }, { "symptom": "The bolt will not go back in.", "cause": "The bolt handle is not aligned, the firing pin is not at top centre, or the trigger is not being held.", "fix": "Check the handle lines up with the bolt arm slot and the firing pin is top centre, then pull the trigger firmly with the safety off while sliding the bolt in. If it will not go, take it out and recheck alignment rather than forcing it." } ], "sources": [ { "n": 1, "id": "savage-mark-ii-manual", "title": "Savage Arms Bolt-Action Rimfire Manual — Mark I, Rascal, Mark II, Model 93, B.Mag", "publisher": "Savage Arms, Inc.", "reliability": "primary", "url": "https://saweb.s3.us-east-1.amazonaws.com/manuals/manual_rimfire_boltaction.pdf", "accessed": "2026-09-14" }, { "n": 2, "id": "savage-arms-service-savagearms-com-h-e32896", "title": "What is the torque spec for my action screws?", "publisher": "Savage Arms (service.savagearms.com help center)", "reliability": "primary", "url": "https://service.savagearms.com/hc/en-us/articles/214238343-What-is-the-torque-spec-for-my-action-screws", "accessed": "2026-09-27" }, { "n": 3, "id": "savagearms-specs-c4a2ac", "title": "Mark II F | Accurate 22 LR for Target Shooting | Savage Arms", "publisher": "Savage Arms", "reliability": "primary", "url": "https://savagearms.com/firearms/model/mark-ii-f", "accessed": "2026-10-03" }, { "n": 4, "id": "mdt-sporting-goods-ltd-modular-drive-9d8d3c", "title": "MDT Oryx Chassis System — User Manual (13694, Version 07.14.26), attached to MDT help-centre article 'ORYX Chassis Installation Guides'", "publisher": "MDT Sporting Goods Ltd. (Modular Driven Technologies, MDT)", "reliability": "secondary", "url": "https://support.mdttac.com/hc/article_attachments/51468856863892", "accessed": "2026-10-11" }, { "n": 5, "id": "mdt-sporting-goods-ltd-modular-drive-5108b3", "title": "MDT Field Stock — User Manual (13739, Version 03.3.26), attached to MDT help-centre article 'Field Stock Installation' (image-only PDF; read from the rendered page)", "publisher": "MDT Sporting Goods Ltd. (Modular Driven Technologies, MDT)", "reliability": "secondary", "url": "https://support.mdttac.com/hc/article_attachments/51745558131092", "accessed": "2026-10-11" } ] }