← All firearms · Printable work order

CZ P-10 C

• easy
• Shop tier 1
• high confidence
• Pistol
• striker fired
• polymer frame
• duty pistol
• toolless field strip

field strip ~1 min · reassembly ~2 min · detail strip ~20 min

Specifications

Model-specific safety

• The takedown tabs sit on both sides of the frame above the trigger and must be pulled down together with the slide locked back.
• Verify the chamber is empty before any takedown attempt. Confirm from your manual whether your specific variant requires the trigger to be pressed — CZ has made running changes across the P-10 line.
• The recoil spring assembly is under tension when the slide is off.

Under spring tension

• Recoil spring assembly

Easily lost parts

Takedown tabs · Recoil spring assembly

Tools

No tools required for the field strip.

Shop difficulty

Shop tier 1 Tier 1 — easy among pistols, for the full job: strip to the parts that get coated and put it back together working. 51 line items in CZ's P-10 family list, but the rows include three backstraps, seven firing-pin sub-parts and version-only parts with the magazine as one row, so it is Glock-scale; a Glock-pattern pinned striker frame with no documented spring-held-while-pinning trap beyond putting the trigger to the rear before the slide goes on. Rated alongside the Glock, on thin evidence.

Parts: 51 numbered parts (Complete pistol (magazine as one row); our transcribed parts list = single CZ P-10 family 'LIST OF PARTS' (English) for P-10 C, F, S, OR and suppressor-ready versions; rows marked * vary by version…), from CZ P-10 Instruction Manual — Česká zbrojovka a.s. Uherský Brod, p. 12 czubstrapiwebsitestorage.blob.core.windows.net [1].

Bench time: about 20 min to strip, 25 min to rebuild (estimate). Estimate for an experienced tech with the right tools, detail strip to coatable parts (slide internals, frame pins, trigger group, sights) and rebuild to a function-checked gun; scale used across pistols: Glock-pattern 15/20 min, other strikers 20-30/25-40, DA/SA hammer guns 30-35/45-50, Hi-Power, Colt 1903 and Mark 23 40-45/60-75. Glock-pattern pinned frame with steel inserts left in place;

Small parts: 14 pins, 13 springs, 0 detents or plungers (counted from the manufacturer's parts list (one per key number unless a quantity is given))

What comes off for coating

• Slide: slide cover, firing pin assembly (firing pin, spring holders, case, automatic safety and spring), extractor, pin and spring, rear sight and screw, front sight and screw
• Barrel: barrel, recoil spring
• Frame: back strap and pin, trigger bar pin, trigger and trigger bar, trigger bar disconnector and spring, trigger safety and pin, slide stop and spring, disassembly plate, retainer and spring, magazine catch, plug, spring and pin
• Left in place: front and rear steel inserts and their coiled pins

Special tools

• Small pin punch — Frame and trigger bar pins

Known pain points

• The slide only goes back on with the trigger pulled to the rear, otherwise the frame hits the trigger bar protrusion. (reassembly)
  Source: CZ P-10 Instruction Manual — Česká zbrojovka a.s. Uherský Brod czubstrapiwebsitestorage.blob.core.windows.net [1] — “Before reassembling the slide on the frame, the trigger must be put to the rear (pulled) position to prevent the frame colliding with the protrusion on the trigger bar.”
• CZ sends firing-pin (striker) cleaning and disassembly to a competent gunsmith. (both)
  Source: CZ P-10 Instruction Manual — Česká zbrojovka a.s. Uherský Brod czubstrapiwebsitestorage.blob.core.windows.net [1] — “it is advisable to also disassemble magazine and to entrust the pistol to a competent gunsmith for the firing pin cleaning.”

See also 2 documented reassembly problems and their fixes.

Fit or check on rebuild

• Trigger to the rear before the slide goes on — Otherwise the frame collides with the trigger bar protrusion
  Source: CZ P-10 Instruction Manual — Česká zbrojovka a.s. Uherský Brod czubstrapiwebsitestorage.blob.core.windows.net [1] — “Before reassembling the slide on the frame, the trigger must be put to the rear (pulled) position to prevent the frame colliding with the protrusion on the trigger bar.”
• Sight position / re-zero — Drift or pressed sights moved for coating shift point of impact unless witness-marked and returned to the same spot
• Full function check (trigger reset, safeties, slide lock-back, drop of striker/hammer only on trigger) — Standard after any fire-control strip; confirms springs and sears went back correctly

This is Pew-Takedown's rating, not the manufacturer's. How tiers are rated. Forum reports are owners' experience, not specifications.

Manufacturer videos

Official videos from Česká zbrojovka (CZ)'s own channels, linked rather than copied. Where a video and the steps on this page differ, follow the manufacturer's manual and video.

• How to Clean a CZ Pistol czusafirearms field strip, cleaning, maintenance, reassembly · 2021-10-27
  Covers: CZ handguns (description: 'disassemble, oil, and clean a CZ handgun')
• CZ P-10 SAFETY FEATURES CZ Firearms operation · 2026-06-24
  Covers: CZ P-10 series
• How to Change Backstraps on a CZ Pistol czusafirearms adjustment · 2022-06-10
  Covers: CZ pistols with interchangeable backstraps (thumbnail shows an OD-green P-10-type pistol)

Procedures

Torque specifications

Reported by other sources — not the manufacturer

Materials and factory finish

As stated by Česká zbrojovka (CZ). Prep, masking and cure depend on these; a polymer or aluminium part, a nitrided or anodised finish, and a blued steel part are each a different job. Variants with other finishes may exist — check the maker's page for the exact SKU on the bench.

Parts list

Transcribed from the manufacturer's parts list (CZ P-10 Instruction Manual — Česká zbrojovka a.s. Uherský Brod, p. 12 czubstrapiwebsitestorage.blob.core.windows.net [1]) — Single CZ P-10 family list (English section) for all versions in the manual (P-10 C, F, S, OR, suppressor-ready); rows marked * vary by version or are absent. No separate P-10 C list. CS/DE/ES/FR copies omitted.. Key numbers refer to the exploded view in that document.

Function check

• Verify the pistol is unloaded with no magazine inserted before each check.
• Rack the slide and press the trigger. The striker should release cleanly.
• Hold the trigger to the rear, rack the slide, then release slowly and confirm the reset.
• Press the trigger again to confirm the striker releases.
• Confirm the slide locks open on an empty magazine and the magazine drops free.

Maintenance

Lubrication points

• Frame rails where the slide rides
• Barrel hood and locking lug
• Outside of the barrel at the muzzle end
• Rear barrel lug where the recoil spring assembly bears

Cleaning notes

Light lubrication only — a thin film on the rails and barrel. Keep the striker channel dry and free of solvent, since oil there collects fouling and causes light strikes.

Suggested inspection interval: roughly every 5000 rounds. This is a general guideline, not a manufacturer specification.

Wear parts to inspect

Recoil spring assembly · Extractor · Striker spring

Common issues

Also covers

The procedures above are reported to apply to: CZ P-10 F · CZ P-10 S · CZ P-10 M. Verify against the manual for your specific model.

Similar manual of arms

• CZ 75 B
• Glock 19 Gen5

Sourcing